Dell Precision T7400 Quick Reference Guide - Page 26
Diagnostic Lights, Product Information Guide, Diagnostic Light Codes During POST - bios
View all Dell Precision T7400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Diagnostic Lights CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide. To help troubleshoot a problem, your computer has four lights labeled 1, 2, 3, and 4 on the front panel (see "Front View (Tower Orientation)" on page 18). When the computer starts normally, the lights flash, and then turn off. If the computer malfunctions, use the sequence of the lights to help identify the problem. NOTE: After the computer completes POST, all four lights turn off before booting to the operating system. Diagnostic Light Codes During POST Light Pattern Problem Description Suggested Resolution The computer is in a normal off condition or a possible pre-BIOS failure has occurred. Plug the computer into a working electrical outlet and press the power button. A possible BIOS failure has occurred; the computer is in the recovery mode. • Run the BIOS Recovery utility, wait for recovery completion, and then restart the computer. • If the problem persists, contact Dell (see "Contacting Dell" in your User's Guide). A possible processor • Reseat the processor (see "Processor" failure has occurred. in your User's Guide). • If the problem persists, contact Dell (see "Contacting Dell" in your User's Guide). 26 Quick Reference Guide