Dell XPS One 24 Service Manual - Page 11

Replacing the Computer Cover

Page 11 highlights

3 Replacing the Computer Cover CAUTION: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance. CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover. NOTICE: Ensure that sufficient space exists to support the system with the cover removed-at least 30 cm (1 ft.) of desk top space. 1 Follow the procedures in "Before You Begin" on page 9. NOTICE: Before opening your computer, ensure that you place the computer on a soft cloth or clean surface to avoid any scratches on the display. 2 Place the computer face down on a flat surface. 3 Loosen the two captive screws securing the computer cover. Replacing the Computer Cover 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50

Replacing the Computer Cover
11
3
Replacing the Computer Cover
CAUTION:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
NOTICE:
Ensure that sufficient space exists to support the system with the cover
removed—at least 30 cm (1 ft.) of desk top space.
1
Follow the procedures in "Before You Begin" on page9.
NOTICE:
Before opening your computer, ensure that you place the computer on a
soft cloth or clean surface to avoid any scratches on the display.
2
Place the computer face down on a flat surface.
3
Loosen the two captive screws securing the computer cover.