Dell XPS One 24 Service Manual - Page 40
Heat Sink Assembly on Clean the thermal grease from the bottom of the heat sink.
View all Dell XPS One 24 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
12 Place the processor lightly in the socket and ensure that the processor is positioned correctly. 13 When the processor is fully seated in the socket, close the processor cover. Ensure that the tab on the processor cover is positioned underneath the center cover latch on the socket. 14 Pivot the socket release lever back towards the socket, and snap it into place to secure the processor. 15 Clean the thermal grease from the bottom of the heat sink. NOTICE: Ensure that you apply new thermal grease. New thermal grease is critical for ensuring adequate thermal bonding, which is a requirement for optimal processor operation. 16 Apply the new thermal grease to the top of the processor. NOTICE: Ensure that the processor heat sink assembly is correctly seated and secure. 17 Replace the processor heat sink assembly (see "Replacing the Processor Heat Sink Assembly" on page 33). 18 Replace the top shield (see "Replacing the Top Shield" on page 15). 19 Replace the computer cover (see "Replacing the Computer Cover" on page 11). 20 Connect your computer and all attached devices to electrical outlets, and then turn them on. 40 Replacing the Processor