Denon AVR 1707 Owners Manual - English - Page 39

ENGLISH Advanced Operation Multi zone music entertainment system • ZONE2 speaker out can be used when "ZONE2" is selected at "Power Amp Assignment". In this case, surround back speaker out cannot be used for MAIN ZONE. • When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONE and ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit. • For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions. • The main zone output can be turned on and off with MAIN button. ¢ When using the SURR.BACK/ZONE2 amplifier as the ZONE2 • To use the ZONE2, turn on the ZONE2 button. • The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit's ZONE2 VOLUME button. [System configuration and connections example] Using this unit's internal amplifier as the ZONE2. Advanced Operation Remote control unit operations during multisource playback (selecting the source) This is only possible when the main unit in the ZONE2 mode ( page 43). 1 Set [MODE SELECTOR 1] to the "AUDIO". 2 Set [MODE SELECTOR 2] to the "ZONE2". 3 Press [ZONE2 ON]. • The ZONE2 indicator lights. To cancel the ZONE2 mode: Press [ZONE2 OFF]. MAIN ZONE 5.1-channel systems Monitor FL DVD player B C AVR-1707 FR SW ZONE2 4 Press [INPUT SELECTOR]. The ZONE2 source switches directly. 5 The output level of the ZONE2 SPEAKER OUT terminals can be controlled pressing [VOLUME]. Default setting (ZONE2 volume level): - - - dB (Minimum) 6 When the ZONE2 SOURCE function is set to "TUNER", the preset channel can be selected pressing [CHANNEL]. Input ZONE2 SPEAKER OUT RC-617 SL RC-616 SR SYSTEM REMOTE CONTROL UNIT RC-1048 : Room-to-room remote control system (separately sold) control line : Speaker cable Refer to "Connections" ( page 17, 18). PROGRAMMABLE REMOTE CONTROL UNIT 36 ENGLISH