Denon AVR-1804 Owners Manual - Page 27
Setting the Auto Surround Mode, Setting the Ext. In SW Level - specifications
View all Denon AVR-1804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
ENGLISH Setting the Auto Surround Mode For the three kinds of input signals as shown below, the surround mode played the last is stored in the memory. At next time it the same signal inputs, the memorized surround mode is automatically selected and the signal is played. Note that the surround mode setting is also stored separately for the different input function. SIGNAL Default Auto Surround Mode q Analog and PCM 2-channel signals STEREO w 2-channel signals of Dolby Digital, DTS or other multichannel format Dolby PLII Cinema e Multichannel signals of Dolby Digital, DTS or other multichannel format Dolby or DTS Surround 1 Select "ON" if you want to use the auto surround mode, "OFF" if you do not want to use it. 22 AUTOSURR. ON 2 Press the ENTER or (down) button to switch the Ext. In SW Level setting. Setting the Ext. In SW Level Set the playback level of the analog input signal connected to the Ext. In terminal. 1 Select desired setting. • Select according to the specifications of the player being used. Also refer to the player's operating instructions. • +15dB (default) recommended. (0, +5, 10 and +15 can be selected.) 23 EXT.IN SW +15 2 Press the ENTER or (down) button to switch the Power Amp Assignment setting. 27