Denon AVR-1804 Owners Manual - Page 43
Surround
View all Denon AVR-1804 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
ENGLISH 14 SURROUND Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 20) or from the remote control unit, as described below. • Adjusting with the remote control unit using the test tones is only possible in the "Auto" mode and only effective in the DOLBY/DTS SURROUND modes. The adjusted levels for the different modes are automatically stored in the memory. 1 Set the DOLBY/DTS SURROUND modes. (Main unit) 2 Press the TEST TONE button. (Remote control unit) (Remote control unit) 3 Test tones are output from the different speakers. Use the channel volume adjust buttons to adjust so that the volume of the test tones is the same for all the speakers. (Remote control unit) 4 After completing the adjustment, press the TEST TONE button again. (Remote control unit) 1 1 3 3 2, 4 43