Denon DN-T625 Operating Instructions - Page 19

ENGLISH (3) Detailed Description of Preset Functions (* = initial setting) 01) "Preset Type (*)" (Three different sets (types) of presettings can be made and used for different purposes.) *01:P No=1 : Set to preset type 1. *01:P No=2 : Set to preset type 2. *01:P No=3 : Set to preset type 3. 02) "Program 1 OFF (ON)" (CD) *02:Prg 1 : Store the contents of program 1 when on. (Initial setting - OFF) 03) "Progam 2 OFF (ON)" (CD) *03:Prg 2 : Store the contents of program 2 when on. (Initial setting - OFF) 04) "Program 3 OFF (ON)" (CD) *04:Prg 3 : Store the contents of program 3 when on. (Initial setting - OFF) 05) "Power On (****)" *05:P On=Stb : Standby mode is set at specified track after TOC is read. *05:P On=Ply : Playback begins in the all repeat mode after TOC is read. *05:P On=Stp : Stop mode is set after TOC is read. 06) "Time Mode" (CD) *06:Time=ELA : Time display is elapsed time when power is turned on. *06:Time=REM : Time display is remaining time when power is turned on. 07) "Random ON/OFF" (CD) *07:Rand=OFF : Playback mode is normally when power is turned on. *07:Rand=ON : Random playback mode is set when power is turned on. 08) "Finish Mode " (CD) *08:Fin=Stop : Stop mode is set after playback ends. *08:Fin=Next : Standby mode is set at next track after playback ends. *08:Fin=RCue : Standby mode is set at playback start position after playback ends. 09) "Next Standby" (CD) *09:NStb=OFF : Return to the play start position and standby when the CUE button is pressed during playback. *09:NStb=ON : Standby at the beginning of the next track when the CUE button is pressed during playback. 10) "Next Track Reserve" (CD) *10:Rsv=OFF : Specified track is searched for immediately when select knob is turned during playback. *10:Rsv=ON : Track to be searched for is scheduled after playback of current track ends when select knob is turned during playback. 11) "Play Lock" (CD) *11:Lock=ON *11:Lock=OFF : Inhibit all operations other than the 1 3, TIME, CUE, 2, PITCH, +, - and TITLE buttons during playback. : Enable all functions during playback. 12) "Panel Lock ON/OFF" (CD) *12:Pane=OFF : Enable operation of all the buttons on the front panel. *12:Pane=ON : Inhibit operation of all panel buttons other than those use for presetting operations and OPEN/CLOSE button. 13) "CueDet. Level" (CD) *13:CDet=-** : Set the audio detection level for cueing. (*-48 / -42 / -36) *13:CDet=OFF : Sound startup position is not cued. 14) "CD Pitch" *14:Pit=Norm *14:Pit=+/-*.* : Play at normal speed. : Play at variable speed. ±(0.2 / 0.4 / 0.6 / 0.8 / 1.0 / 1.2 / 1.4 / 1.6 / 1.8 / 2.0 / 2.2 / 2.4 / 2.6 / 2.8 / 3.0), 0Fix 15) "Text Display" (CD) *15:Text=OFF : Display is set time mode when power is turned on. *15:Text=ON : Display is set text mode when power is turned on. 16) "Frame Display" (CD) *16:Frm=ON : Display the frames on the time display during playback. *16:Frm=OFF : Do not display the frames on the time display during playback. (The frames are displayed in the manual search, standby, pause and end monitor modes.) 17) "EOM Time" (CD) *17:EOM=**s *17:EOM=OFF : Set the EOM time. (5 / *10 / 15 / 20 / 30 / 60) : Do not use the EOM function. 18) "Sleep ON (OFF)" (CD) *18:Sleep=** : Automatically turn the servo functions off if no button is operated for ** minutes in the pause, standby or manual search mode. (1 / 2 / 5 / 10 / 15 / *30) *18:Slp=OFF : Do not automatically turn the servo functions off. 19) "IR Code" *19:RC=DENON *19:RC=RC5 : Receive denon codes. : RC-5 codes can be received. 20) "IR Remote" *20:IR=ON *20:IR=OFF : Accept infrared remote control signals. : Do not accept infrared remote control signals. 21) "Serial Remote" *21:RS=232C *21:RS=422A *21:RS=OFF : Set the serial ports to RS232C. : Set the serial ports to RS422A. (DN-T645 only) : Inhibit signals of 9P D-Sub connector. 22) "Parallel Remote" (DN-T645 only) *22:Para=ON : Enable input of control signals to the parallel remote connector. *22:Para=OFF : Inhibit input of control signals to the parallel remote connector. 23) "Fader Start" (CD) (DN-T645 only) *23:F=Pause : Start playback when remote fader pins (9-10) are short-circuited and pause when pins are open. *23:F=Play : Start playback when remote fader pins (9-10) are short-circuited and continue playback when pins are open. 24) "Loop Cycles" *24:Loop=** : Set the number of cycles for the relay and reverse mode. (1 / *5 / 10) 25) "Preset Clear (Ini. Preset)" *25:P = Init? : Clear the presettings (set to the initial factory values). 26) "Ver = xxxx" : Display the microprocessor version. ("xxxx" is a number.) 27) "Play List" (DN-T645 only) *27:PLst=OFF : Play List does not perform. *27:PList=ON : MP3 is performed according to Play List. 19