Epson 2080 User Manual - Page 16

Using the push and pull tractors in combination (optional) To improve continuous paper feeding and reduce paper jams, you can use two tractors at the same time. This is especially helpful for printing on continuous pre-printed forms, multipart forms, or labels, and for printing high-quality graphics. When using two tractors in combination, you can load paper either in the front paper slot onto the front push tractor and the pull tractor, or in the rear paper slot onto the rear push tractor and the pull tractor. Combination rear push and pull Description To use the rear push tractor with the pull tractor, you need to purchase the optional pull tractor (C80032V) and install it in the pull position. Note: Because thick multipart forms require a straight paper path, load them in the front slot. Caution: Do not load continuous paper with labels onto the rear push tractor even when it is used in combination with the pull tractor. If you load continuous paper with labels onto the rear push/pull tractor, the labels may come off their backing sheet inside the printer and cause a paper jam. To use the front push tractor with the pull tractor, you need to purchase two optional pull tractors (C80032T). Mount the two tractors in the front push and pull positions. front push and pull Note: For more information on using two tractors in a push and pull combination, see page 2-27. Getting to Know Your Printer 7