Epson 2080 User Manual - Page 74
About Your Printer's Default Settings in
View all Epson 2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Thick paper, such as continuous paper with labels, requires a straight or almost straight paper path. You can load labels in the front (push tractor or pull tractor) or bottom (pull tractor) paper slot; however, for best results, use the tractor in the pull position and load paper in the front or bottom paper slot. 2 You load labels the same way you load ordinary continuous paper, except you must set the paper thickness lever to 2 before printing on labels. See "Loading paper onto the pull tractor" on page 2-21 for more information. c Caution: t Do not load continuous paper with labels in the rear paper slot because the paper path from the rear slot is curved; labels may come off their backing sheet inside the printer and cause a paper jam. t Never use the tear-off feature (by pressing the Tear Off/Bin button or turning on the auto tear-off mode as described in "About Your Printer's Default Settings" in Chapter 5) to feed continuous paper with labels backward; they may come off their backing sheet and jam the printer. t Because labels are sensitive to temperature and humidity, use them only under normal operating conditions, as follows: Temperature 15 to 25°C (59 to 77°F) Humidity 30 to 60% RH t Do not load continuous paper with labels that is damaged, curled, or wrinkled. t Do not leave labels loaded in the printer between jobs; they may curl around the platen and jam when you resume printing. Printing on Continuous Paper 2-33