Epson 2080 User Manual - Page 89

Loading envelopes You can load envelopes only in the top paper slot as described in "Loading Single Sheets in the Top Paper Slot" on page 3-8. Also follow these guidelines: t Load envelopes one at a time in the top slot, with the flap edge first and the flap side up. flap side up, printable side down t Set the paper thickness lever (located under the printer cover) to position 2 to 6 to match the thickness of the envelope. t Before printing, turn on the card mode by pressing the Tear Off/Bin button until both Tear Off/Bin lights are on. After you finish printing on envelopes, press the Tear Off/ Bin button once to exit the card mode. (Bin 1 is selected.) t Do not use envelopes that are curled or folded. Also avoid using envelopes that are too thin; they may curl during printing and become jammed. t If you use No. 6 envelopes, align the left edge of the envelope with the arrow mark on the printer. t Use envelopes only under normal temperature and humidity conditions, as follows: Temperature 15 to 25°C (59 to 77°F) Humidity 30 to 60% RH 3-6 Printing on Single Sheets