Epson 2080 User Manual - Page 73

Loading multipart Forms You can use carbonless multipart forms of up to five parts (four copies in addition to the original). Make sure you set the paper thickness lever to the proper position based on the number of layers in your form. For best results with thick paper such as multipart forms, select a straight or almost straight paper path. It is best to load multipart forms using: t the front slot and the front push tractor (optional) t the front or bottom slot and the pull tractor (optional) Except for setting the paper thickness lever, you load multipart forms the same way you load ordinary continuous paper. For details, see the sections on loading continuous paper earlier in this chapter. Note: t Be sure your multipart forms do not exceed 0.39 mm (0.015 in.) in thickness for the printable area and 0.9 mm (0.035 in.) for the perforated edges. t Use multipart forms only under normal temperature and humidity conditions, as follows: Temperature 15 to 25°C (59 to 77°F) Humidity 30 to 60% RH t Do not load paper that is damaged, curled, or wrinkled. Loading Continuous Paper With Labels When printing on labels, use only the type of labels that are mounted on continuous backing sheets with sprocket holes for use with a tractor feeder. Do not try to print on single sheets with labels because the printer may not feed labels on a shiny backing sheet properly. 2-32 Printing on Continuous Paper