Epson 2080 User Manual - Page 195
Barcode data, Bit 1 = Human readable character HRC
View all Epson 2080 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 195 highlights
c: Control flag Bit 0 = Check digit 0: The printer does not add a check digit. 1: The printer adds a check digit. Bit 1 = Human readable character (HRC) 0: The printer adds the HRC. 1: The printer does not add the HRC. C Bit 2 = Position of flag character (for EAN-13 and UPC-A only) 0: Center 1: Under Bits 3-7 = Not used Barcode data Barcode data corresponds to the barcode symbology. The data number of each barcode type is constant. The barcode is printed only if the following valid characters are set. Barcode type Number of valid characters 1 (HEX) EAN-13 EAN-8 Interleaved 2 of 5 UPC-A UPC-E Code 39 Code 128 POSTNET 0D 8 2 to FF 0C 0C or 8 1 to FF 2 to FF 6 or 0A or 0C Number of valid characters 1: Control flag c b0=0 Number of valid characters 2: Control flag c b0=1 Number of valid characters 2 (HEX) 0C 7 2 to FF 0B 0B or 7 1 to FF 2 to FF 5 or 9 or 0B Specifications C-15