Epson 2200 Service Manual - Page 125

EPSON Stylus PHOTO 2100/2200 C A U T IO N When removing the Middle Housing, fully push the hooks of the Middle Housing into the printer inside to release the hooks since the six cutouts of the Lower Housing are broken easily. Refer to Figure 4-10, "Hooks That Secure the Left and Right of the Middle Housing". Revision B 4.2.1.4 Removing the Printer Mechanism/Lower Housing 1. Remove the Rear Housing. (Refer to 4.2.1.2.) 2. Remove the Middle Housing. (Refer to 4.2.1.3.) 3. Remove the one screw 2) C.B.S 3×10 (9±1kgf.cm) and four screws 4) C.B.P 4×12 (9±1kgf.cm) that secure the Printer Mechanism. Rear left side Rear right side Printer Mechanism Lower Housing C.B.P 4×12 C.B.S 3×10 Front Frame Waste Ink Pad DISASSEMBLY AND ASSEMBLY Front left side C.B.P 4×12 C.B.P 4×12 Front right side Figure 4-11. Screws That Secure the Printer Mechanism Fit the screws 4) C.B.P 4×12 (9±1kgf.cm) in the order shown in Figure 4-11. (T.B.D.) 4. Peel the Waste Ink Pad on the front right side, as viewed from the printer front, from the Front Frame. Disassembly 125