Epson 2200 Service Manual - Page 180

EPSON Stylus PHOTO 2100/2200 4. Remove the Grounding Spring that engages the Paper Eject Roller Shaft A and Left Frame. Revision B 6. After lifting the Paper Eject Roller Shaft A up as viewed from the printer front, release the left side Bush 6 from the Left Frame, and pull and remove the Paper Eject Roller Shaft A to the diagonal top right. Grounding Spring Figure 4-132. Removing the Grounding Spring 5. Release the hooks of the Bushes 6, which are located on the left and right of the Paper Eject Roller Shaft A, from the Left and Right Frames, and turn the Bushes 6 to the rear as seen from the printer front. Bushes 6 Paper Eject Roller Shaft A Figure 4-133. Releasing the Bushes 6 2 3 1 Paper Eject Roller Shaft A Figure 4-134. Removing the Paper Eject Roller Shaft A When mounting the Carriage Lock Lever located on the right of the Paper Eject Roller Shaft A as viewed from the printer front, face its L-shaped leg frontward. Refer to Figure 4-135, "Orientation of Mounting the Carriage Lock Lever". L-shaped leg Carriage Lock Lever DISASSEMBLY AND ASSEMBLY Disassembly Figure 4-135. Orientation of Mounting the Carriage Lock Lever 180