Epson 2200 Service Manual - Page 178

EPSON Stylus PHOTO 2100/2200 4.2.15.1 Reinstalling the PF Scale This section explains the procedure for reinstalling the following parts. " PF Scale (Loop Scale) " Scale Mounting Plate " D50 Tape (double-faced tape) 1. Apply the D50 Tape to the PF Scale. D50 Tape PF Scale Loop Scale Assembly fitting jig Tool No.#F730 Figure 4-129. Peeling the Protective Sheet C A U T IO N The D50 Tape should match the outline of the printed circle. Refer to Figure 4-129, "Peeling the Protective Sheet". Revision B 2. After matching the round holes of the PF Scale with the projections of the Spur Gear 76, insert the PF Scale so that it is in parallel with the Spur Gear 76. At this point, do not apply the PF Scale to the Spur Gear 76. 3. Using the PF Scale Mounting Jig (AS-Tool No. 1051767), apply the PF Scale to the Spur Gear 76. C A U T IO N When applying the PF Scale to the Spur Gear 76, slowly apply it so that its inner diameter is not damaged. If the inner diameter of the PF Scale is scratched and the PF Scale become eccentric, the paper loading accuracy will decline. Refer to Figure 4-130, "Applying the PF Scale". Spur Gear 76 Projections PF Scale PF Scale Mounting Jig Tool No.1051767 Figure 4-130. Applying the PF Scale DISASSEMBLY AND ASSEMBLY Disassembly 178