Home » Epson Manuals » Photo Printers » Epson 2200 » Manual Viewer

Epson 2200 Service Manual - Page 28

Default Setting Selection Function - reset

UPC - 010343841840

Add to My Manuals
Save this manual to your list of manuals

Page 28 highlights

EPSON Stylus PHOTO 2100/2200 1.3.5 Default Setting Selection Function CODE PAGE SELECTION FUNCTION By operating the panel at power-on, you can select the default character code table. Operating procedure Hold down the Roll paper switch and switch power on or reset the panel. When the blink of the Paper LED has started, release the Roll paper switch. The Paper LED blinks. Code Page is changed (changed from PC437 to PC850 or from PC 850 to PC437 automatically) and all LEDs are then lit for about 2 seconds. Confirmation of the current Code Page The currently selected Code Page can be confirmed by performing status printing. Revision B PARALLEL INTERFACE 1284.4 OPERATION MODE SELECTION By operating the panel at power-on, you can select the operation mode (On/Off/Auto) of the IEEE1284.4 protocol in the parallel interface. Operating procedure Hold down the Roll paper switch and switch power on.*a When the blink of the Paper LED has started, release the Roll paper switch but keep pressing the Paper switch.*b When the Power LED, Paper LED and all Ink LEDs are lit, release the Paper switch. Press the Roll paper switch to select the operation mode (every time you press the switch, the operation mode changes from Auto to On to Off to Auto ...). The Paper LED blinks. (About 10 seconds) The Power LED, Paper LED and all Ink LEDs are lit. The operation mode currently selected is indicated by the corresponding Ink LED. On : Ink LED 7 is lit. Off : Ink LED 6 is lit. Auto : Ink LED 5 is lit. Switch power off. or Press the Paper switch. The selected operation mode is stored and power is switched off. The selected operation mode is stored and the printer starts. *a : By initializing the panel, you cannot select the 1284.4 operation mode. To avoid panel initialization, the power must be left off for more than about 10 seconds or the power plug must be disconnected from the receptacle once with power off. *b : Note that if you do not press any switch for 2 or more seconds after you released the Roll paper switch, Code Page selection will be executed. PRODUCTION DESCRIPTION Functions 28

Section	Page
FRONT MATTER	1
CONTENTS	6
CHAP 1-PRODUCTION DESCRIPTION	8
Overview	9
Basic Specifications	10
Specification Outline Comparison	10
Paper Specification	15
Printing Area	17
Ink Type-based Medium Compatibility Specifications	23
Release Lever	25
Functions	26
Control Panel	26
Switches	26
Indicators	26
Switch Functions	26
Default Setting Selection Function	28
Special Setting Mode Function	29
Status Printing	30
Panel Operation for Roll Paper Printing	31
Panel Operation for CD-R Printing	33
Panel Operation for Thick Paper Printing	33
Panel Operation in Roller Cleaning Mode	34
Indicator Display in Normal Mode	35
Error Status	36
Casing Specifications	37
Accessories	37
Environment Specification Items	38
CHAP 2-OPERATING PRINCIPLES	39
Overview	40
Printer Mechanism	40
Carriage Mechanism	41
Print Mode	44
Paper Feeding Mechanism	48
Paper Loading Mechanism	54
Ink System Mechanism	58
Ink Sequence	60
Paper Cutter Mechanism	63
Power-On Sequence	65
Electrical Circuitry Operating Principles	66
Power Supply Circuit Operating Principle	67
C387MAIN Circuit Operating Principle	68
CHAP 3-TROUBLESHOOTING	69
Overview	70
Error Indications and Fault Occurrence Causes	70
Troubleshooting	78
Superficial Phenomenon-Based Troubleshooting	104
EEPROM Data Analysis	114
CHAP 4-DISASSEMBLY AND ASSEMBLY	115
Overview	116
Precautions	116
Tools to Be Used	117
Screw List	118
Pre-Shipment Checks	119
Disassembly	120
Removing the Housings	121
Removing the Board Assembly	127
Removing the Waste Ink Pads	131
Removing the ASF Unit	132
Removing the Paper Eject Unit	140
Removing the Paper Eject Roller B	144
Removing the Printhead	146
Removing the Carriage Guide Shaft B	149
Removing the Carriage Guide Shaft A and Carriage Unit	152
Removing the Ink System Unit	158
Removing the Release Lever Shaft	159
Removing the Sensors	161
Removing the Motors	168
Removing the DE Unit and ASF/Pump Motor	171
Removing the PF Roller	175
Removing the Paper Eject Roller Shaft A	179
Removing the PF Roller Support	181
Disassembling the Cutter Unit	182
Fitting the Protective Materials	186
CHAP 5-ADJUSTMENT	187
Adjustment Items and Overview	188
Servicing Adjustment Item List	188
Priority of Adjustment Items	193
Replacement Part-Based Adjustment Priorities	194
Required Jigs, Tools and Like	196
Adjustments	197
Servicing Program Usage Outline	197
Head ID Input Function	199
CR motor drive torque dispersion measurement	199
PG Adjustment	200
Head Angular Adjustment	204
CR Tooth Skip Prevention Mechanism Adjustment	206
PF Adjustment	206
PW Sensor Adjustment	207
Bi-D Adjustment	208
Pixel Shift Adjustment	209
Cut Position Adjustment	210
USB ID Input	210
IEEE-1394 ID Input	211
First dot position adjsutment (Left/Right Margin Adjustment)	211
A3+ Photo Quality Ink Jet Paper 2 Print Pattern Printing Function	212
A4 Plain Paper print check pattern	213
CHAP 6-MAINTENANCE	214
Overview	215
ROM Replacement	215
Cleaning	215
Service Maintenance	216
Lubrication	217
CHAP 7-APPENDIX	226
Connector Summary	227
Connectors and Pin Layouts	227
EEPROM Address Map	231
Exploded Diagram	236
Parts List for EPSON Stylus Photo 2100	248

Match case Limit results 1 per page

EPSON Stylus PHOTO 2100/2200

Revision B

PRODUCTION DESCRIPTION

Functions

1.3.5

Default Setting Selection Function

CODE PAGE SELECTION FUNCTION

By operating the panel at power-on, you can select the default character code table.

PARALLEL INTERFACE 1284.4 OPERATION MODE SELECTION

By operating the panel at power-on, you can select the operation mode (On/Off/Auto)

of the IEEE1284.4 protocol in the parallel interface.

*a : By initializing the panel, you cannot select the 1284.4 operation mode. To

avoid panel initialization, the power must be left off for more than about 10

seconds or the power plug must be disconnected from the receptacle once

with power off.

*b : Note that if you do not press any switch for 2 or more seconds after you

released the Roll paper switch, Code Page selection will be executed.

Operating procedure

Hold down the Roll paper switch and

switch power on or reset the panel.

When the blink of the Paper LED has

started, release the Roll paper switch.

The Paper LED blinks.

Code Page is changed (changed

from PC437 to PC850 or from PC

850 to PC437 automatically) and

all LEDs are then lit for about 2

seconds.

Confirmation of the current Code Page

The currently selected Code Page can be confirmed by performing status printing.

Operating procedure

The Paper LED blinks.

When the blink of the Paper LED has

started, release the Roll paper switch

but keep pressing the Paper switch.

(About 10 seconds)

The Power LED, Paper LED and

all Ink LEDs are lit.

When the Power LED, Paper LED and

all Ink LEDs are lit, release the Paper

switch.

The operation mode currently

selected is indicated by the

corresponding Ink LED.

Press the Roll paper switch to select the

operation mode (every time you press

the switch, the operation mode changes

from Auto to On to Off to Auto ...).

: Ink LED 7 is lit.

Off

: Ink LED 6 is lit.

Auto

: Ink LED 5 is lit.

Switch power off.

Press the Paper switch.

The selected operation mode is

stored and power is switched off.

The selected operation mode is

stored and the printer starts.

Hold down the Roll paper switch and

switch power on.