Epson BrightLink EB-760Wi Users Guide - Page 191
Copying Menu Settings Between Projectors, Saving Settings to a USB Flash Drive
View all Epson BrightLink EB-760Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 191 highlights
Copying Menu Settings Between Projectors After you select menu settings for your projector, you can transfer them to another projector of the same model. Note: Copy the projector's settings before you adjust the projected image using the projector's Geometry Correction settings. Any saved User's Logo setting on the projector will transfer to the other projector. Caution: If the copy process fails due to a power failure, communication error, or for any other reason, Epson will not be responsible for any repair costs incurred. The following settings will not transfer between projectors: • Light Source Hours • Status The following settings will not transfer between projectors if you set the Batch Setup Range setting to Limited: • Password Protection settings • EDID in the Signal I/O menu • Network menu settings Saving Settings to a USB Flash Drive Transferring Settings from a USB Flash Drive Saving Settings to a Computer Transferring Settings from a Computer Parent topic: Adjusting Projector Features Saving Settings to a USB Flash Drive You can save the projector settings you want to transfer to a USB flash drive. Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly. The flash drive must use the FAT format and cannot have any security features. 1. Turn off the projector and unplug the power cord from the projector's power inlet. 191