Epson BrightLink EB-760Wi Users Guide - Page 269
Touch Unit Setup, Calibration Range
View all Epson BrightLink EB-760Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 269 highlights
Setting Connect ELPCB02 Touch Unit Remote Receiver Projector ID (EB-760Wi) Screen Type Screen Position Options On Off Power Touch Unit Setup Touch Calibration Calibration Range Front/Rear Front Rear Off Off 1 through 9 4:3 16:6 (EB-770Fi) 16:9 16:10 21:9 (EB-770Fi) Varying positions available Description Set to On to switch the input source between the HDMI2 port and HDMI3 port each time you press the HDMI2 button on the optional interface box Power: turns on the Touch Unit power Touch Unit Setup: performs angle adjustment for laser diffusion Touch Calibration: performs calibration for finger touch operations Calibration Range: if finger touch operations are recognized as drag operations, select Wide to widen the calibration range Limits reception of remote control signals by the selected receiver; Off turns off all receivers Assigns an ID for the projector when you use multiple projectors Sets the aspect ratio to fit the image on the projection surface. This setting is not available when using the USB or LAN input source Shifts the image position on the screen (only available if the Screen Type setting is not set to the same aspect ratio as the projector's native resolution) 269