Epson BrightLink EB-760Wi Users Guide - Page 219

12. Press 4 and 6 on the remote control to move the left and right pointers into the targets. Note: When you move one pointer, the other pointer also moves slightly. Adjust the pointers in alternating increments. If the pointers move past their targets, press 7 and 9 on the remote control to move the pointers in the opposite direction. If you cannot move the pointers as intended, press Esc on the remote control and start over. When the pointers are in the targets, they turn solid. When the left and right pointers are both solid, press Enter. 13. Follow the on-screen instructions to place the markers on the marker positions and check the adjustment results. The corresponding circles turn solid when the markers are placed on positions 1 and 2. If the corresponding circles are not solid when the markers are placed, return to step 1 and repeat the process. Otherwise, press Enter. 14. Remove the markers and then use your finger to trace the dots on the screen to erase them. 15. When all of the dots have disappeared, use the remote control to select Complete. If any of the dots remain, select Additional Adjustment and follow the on-screen instructions to adjust again. Parent topic: Using Finger Touch Interactivity Calibrating for Finger Touch Interactivity Finger touch calibration coordinates the positioning of your finger with the location of the cursor. Note: You can purchase a touch unit as an optional accessory or use a touch unit from an older BrightLink projector. Note: Do not perform Touch Unit Calibration unless Touch Unit Setup (Auto or Manual) has been successfully completed first. 1. Press the Menu button, select the Installation menu, and press 2. Select Touch Unit and press Enter. 3. Select Touch Calibration and press Enter. Enter. 219