Epson BrightLink EB-760Wi Users Guide - Page 262
Mic Input Level, Video Signal
View all Epson BrightLink EB-760Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 262 highlights
Setting Source EDID (EB-770Fi) Options Signal Format Mic Input Level Overscan Reset to Defaults HDMI1 HDMI2 HDMI3 Description Displays settings selected for the current input source Signal Format: sets the signal type and video range for certain input sources • Video Signal: specifies the signal type from input sources connected to video ports; if interference appears or no image appears when set to Auto, select the appropriate signal type • Video Range: sets the video range to match the setting of an input source connected to the HDMI ports Mic Input Level: adjusts the volume from a microphone when audio is not output to an audio/visual system; when the Mic Input Level setting is turned up, the volume of the other connected device is turned down, and when the Mic Input Level is turned down, the volume of the other connected device is turned up Overscan: changes the projected image ratio to make the edges visible by a selectable percentage or automatically when projecting a component signal Reset to Defaults: resets all settings for the current input source Describes the display capabilities of your projector when the selected input source is HDMI; change this setting as necessary according to the resolution of the current input source 262