Epson BrightLink EB-760Wi Users Guide - Page 215
performed correctly., adjustment. If other objects are on or near the projected image
View all Epson BrightLink EB-760Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
The projector automatically detects which touch unit model is connected and displays the instructions for that model. The instructions shown here are for the ELPFT01 touch unit. 4. Select the option for the Touch Unit installation method that was used and press Enter. 5. If you are using the Touch Unit Bracket, turn the adjustment screw on the bracket counterclockwise until it stops. 6. Attach the two markers to the positions shown on the projected screen making sure the thinner ends of the markers are facing the Touch Unit. Note: Do not place anything other than the markers near the projected image during angle adjustment. If other objects are on or near the projected image, angle adjustment may not be performed correctly. 7. Move each marker over the projected cross until the lines of the cross align with the lines on the marker. Make sure to match the positions so that the crosses overlap with the points on the marker positions. Note: If the magnets won't attach to the screen completely, wipe the area to remove any dirt and try again. For non-magnetic screens, use the supplied tape to secure the markers. 215