Epson BrightLink EB-760Wi Users Guide - Page 197

Parent topic: Copying Menu Settings Between Projectors Related references Projector Light Status Scheduling Projector Events You can save a projector command, such as turning the projector on or off or switching input sources, as an "event." You can schedule when you want the projector to automatically execute the command. Warning: Do not place flammable objects in front of the lens. If you schedule the projector to turn on automatically, flammable objects in front of the lens could catch on fire. Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event. Saving a Scheduled Event Viewing Scheduled Events Editing a Scheduled Event Parent topic: Adjusting Projector Features Related tasks Setting a Password Selecting Password Security Types Saving a Scheduled Event You can select projector commands you want to perform and schedule them as an event. Warning: Do not place flammable objects in front of the lens. If you schedule a projector to turn on automatically, flammable objects in front of the lens could catch on fire. Note: Light Source Calibration events do not start if the projector is not used continuously for at least 20 minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source Calibration events to occur only after 100 hours of usage (EB-770Fi). Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event. 1. Set the date and time in the Management menu. 2. Press the Menu button. 197