Epson BrightLink EB-760Wi Users Guide - Page 74
Selecting Wireless Network Settings in Windows, Setting, Options, Description, DNS Server 1
View all Epson BrightLink EB-760Wi manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Setting DNS Server 1/ DNS Server 2 Options Various IP addresses Description Sets the IP address for the DNS server using 0 to 255 for each address field. The DNS server resolves the host name IPv6 On Off IP Address Display On Off Note: Do not use 127.x.x.x (where x is a number from 0 to 255). When these settings are not set and remain as 0.0.0.0, DNS server information is acquired using DHCP. After acquiring the information, the values remain as 0.0.0.0. Enables IPv6 to allow monitoring and control of the projector over a network using Epson Web Control and PJLink Selects whether to display the IP address on the network standby screen and Home screen Parent topic: Selecting Wireless Network Settings Manually Selecting Wireless Network Settings in Windows Before connecting to the projector, select the correct wireless network on your computer. 1. To access your wireless utility software, access the Desktop and double-click the network icon on the Windows taskbar. 2. Do one of the following: • If your projector is set up on an existing network (Advanced mode), select the network name (SSID). • If your projector is configured for Quick mode, select the projector's SSID. 3. Click Connect. Parent topic: Wireless Network Projection 74