Epson DS-30000 Users Guide - Page 149

Back of Original Image Appears in Scanned Image Scanned Characters are Blurry Characters are not Recognized During Conversion to Editable Text (OCR) Ripple Patterns Appear in an Image Spots or Lines Appear in All Scanned Images Scanned Image is Cropped Resetting the Epson Scan 2 Settings Parent topic: Solving Problems Back of Original Image Appears in Scanned Image If an image from the back of a thin original appears in your scanned image, make sure you selected the correct Image Type setting for your original and select the Text Enhancement setting in Epson Scan 2. You can also select the Remove Background setting in Epson Scan 2. Note: If you select Color as the Image Type setting, you can change the level from Standard to High to remove more of the background. If the image is still visible, you can also select Black as the Background Color setting in Epson Scan 2. Parent topic: Solving Scanned Image Quality Problems Related references Additional Scanning Settings - Main Settings Tab Additional Scanning Settings - Advanced Settings Tab Scanned Characters are Blurry If characters in your scanned images are blurry, try these solutions: • Make sure you do not move the scanner or original while scanning. • Operate the scanner on a flat, stable surface. • Adjust these Epson Scan 2 settings (if available) and try scanning again: • Select the Text Enhancement setting. • If the Image Type setting is Black & White, adjust the Threshold setting or change the Edge Enhancement and Noise Reduction Level settings. • Increase the Resolution setting. • Set the Image Type to Grayscale. 149