Epson PowerLite Pro Z8455WUNL Operation Guide - EasyMP Network Projection - Page 47

Troubleshooting 47 Cannot connect in Advanced Connection Mode or Wired LAN connection Check Remedy Is the SSID setting different. Set the computer, the access point, and the projector to the same SSID. See your computer, router, and projector manuals. Is the same WEP key set? When selecting WEP from Security, set the access point, the computer, and the projector to the same WEP key. See your computer, router, and projector manuals. Are the connection denial functions, such as MAC Set the projector to allow connections from the access point. Addressg restrictions and port restrictions, set correctly at the access point? Are the IP address, the Subnet Mask, and the Gateway Address for the access point and the projector set correctly? When not using a DHCP, adjust each setting. See your projector User's Guide. Are the access point and the projector's subnet different? Select Manual search from EasyMP Network Projection, specify the IP address, and connect. s p.32 The Slide Show cannot be displayed on the desired display when the multi-screen display function is being executed. Check Are you using PowerPoint 2002 or an earlier version? For Windows Remedy To set up and use two or more virtual displaysg, use PowerPoint 2003 or later, or limit the number of virtual displays to one before displaying the Slide Show. Applications are no longer displayed from the computer screen when the multi-screen display function is executed. Check Is another application running on the virtual displayg? For Windows Remedy When EPSON Virtual Display is installed, another application sometimes runs on the virtual display. In this case, set EPSON Virtual Display to "Off" in "Screen properties".