Fluke 28IIEX Fluke 28IIEx User Manual - Page 29
Temperature Measurements, Low-Pass Filter
View all Fluke 28IIEX manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
XW Warning To prevent electric shock or personal injury, do not use the low-pass filter when you measure for hazardous voltages. Voltages larger than what is shown can be present. First, make a voltage measurement without the filter to see if a hazardous voltage is present. Then, select the filter. Note When the low-pass filter is selected, the Product goes to manual range mode. Push to set the range. The Product does not autorange with the low-pass filter set. 1 kHz 100 Hz Figure 3. Low-Pass Filter aom11f.eps Temperature Measurements The Product measures the temperature of a type-K thermocouple (included). Push C to toggle between degrees Celsius (°C) or degrees Fahrenheit (°F). True-rms Digital Multimeter How to Make Measurements W Caution To prevent damage to the Product or other equipment, remember that while the Product is rated for -200.0 °C to +1090.0 °C (-328.0 °F to 1994 °F), the included type-K thermocouple is rated to 260 °C. For temperatures out of that range, use a higher rated thermocouple. Display ranges are -200.0 °C to +1090 °C and -328.0 °F to 1994 °F. Measurements outside these ranges show 0L in the display. When there is no thermocouple connected, the display also reads 0PEn. To measure temperature: 1. Connect a type-K thermocouple to the COM and terminals of the Product. 2. Turn the rotary switch to M. 3. Push to enter temperature mode. 4. Push C to choose Celsius or Fahrenheit. 19