Fluke 8845A FE 8845A & 8846A Users Manual - Page 57
Understanding the Measurement Complete Signal, Accessing and Controlling Memory
View all Fluke 8845A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
3 Front-Panel Operation Controlling Trigger Functions With the desired digit selected, press the soft key labeled -- to decrement the digit or ++ to increment the digit. 5. With the desired delay set, press the soft key labeled ENTER. Understanding the Measurement Complete Signal The trigger port on the Meter's back panel provides a low-true pulse at the completion of each Meter measurement. See the specifications section for more details on this signal. Accessing and Controlling Memory The Meter stores readings and meter configuration information internally and externally memory (8846A only). On the 8846A, external memory connects through the USB port on the front panel of the Meter. Optional Memory in various storage capacities is available from Fluke. See the "Options and Accessories" section in Chapter 1 for Fluke part numbers. In addition to storing and recalling readings and configurations, a memory management function is available to delete files. To access the Memory functions, press the M key. The memory menu appears over the five soft keys: RECALL SETUP, RECALL READING, STORE SETUP, STORE READINGS , and MANAGE MEMORY. Storing Readings in Memory The Meter will hold up to 9999 readings in one internal memory file. The 8846A, with external memory, will hold 999 additional readings files, each of which will store up to 5000 readings. To store readings in internal memory: 1. Press M. + 0.5993 F1 F2 F3 F4 F5 caw032.eps 2. Press the STORE READINGS soft key shown above. 3. If not already highlighted, press the INTERNAL MEMORY soft key. 4. Press the # SAMPLES soft key. 5. To adjust the number of samples, press either to select a digit. With the desired digit selected, press the soft key labeled -- to decrement the digit or ++ to increment the character. 6. With the desired number of samples set, press the ENTER soft key to return to the store readings menu. 7. Press the START soft key to initiate measurement storing. The START soft key will change to STOP which can be pressed to stop the storage process. When the requested number of samples have been stored, the soft key label changes back to START. The MEM annunciator in the display also illuminates while readings are being stored. 3-17