Fluke 8845A FE 8845A & 8846A Users Manual - Page 62
Configuring the Remote Interface, Checking the Meter's Calibration Date - 8846a programmer s manual
View all Fluke 8845A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
8845A/8846A Users Manual 4. To adjust the display to the desired date and time, press either to select a specific digit or the month. With the desired digit or month selected, press the soft key labeled -- to decrement the digit, or ++ to increment the digit. 5. Press the ENTER soft key to set the date and time and return to system menu. Configuring the Remote Interface Selecting an interface port, setting up the ports, and selecting the command set the Meter will recognize is accomplished through the Instrument Setup key. For information on the commands that will remotely control the Meter, refer to the Programmers Manual. Checking the Meter's Calibration Date To read the Meter's calibration date: 1. Press I 2. Press the CAL soft key as shown below. + 0.5993 F1 F2 F3 F4 F5 caw034.eps 3. Press the CAL DATE soft key to display the date the Meter was last calibrated. 4. Press B to go back to the previous menu. Resetting the Meter's Default Settings To reset the Meter's default settings: 1. Press I to see the instrument setup menu. 2. Press the RESET soft key to reset the Meter. 3-22