Foxconn A7GM-S English Manual. - Page 38
► GFX Engine Clock, ► Surround View, ► VBIOS Type, ► NB Azalia, ► Bank Interleaving - drivers
View all Foxconn A7GM-S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
3 concept, wherein a static amount of page-locked graphics memory is allocated during driver initialization. This fixed amount of memory will provide the user with a guaranteed graphics memory at all times, and will no longer be available to the OS. ► GFX Engine Clock It allows you to change the clock rate of graphics engine. ► Surround View SurroundView is the ATI technology that provides multi-graphics controller display capability for both the ATI PCIe-based graphics card and the ATI integrated graphics processor (IGP). Enabling SurroundView does not impact display modes (resolution and color depth) or performance. The display mode of each output is controlled independently by the graphics controller connected to it. 1. When using a non-ATI PCI Express (PCIe) graphics card, SurroundView is not supported. The integrated graphics processor (IGP) is automatically disabled, and the system memory allocated to the IGP is freed for other use. 2. When installing an ATI PCIe graphics card, SurroundView is disabled by default. Enabling SurroundView in the BIOS enables the integrated UMA graphics controller, which in turn makes available up to two additional graphics outputs. When enabling the integrated UMA graphics controller, system memory will be reallocated. ► VBIOS Type This item is used to select the HDMI or DVI video BIOS. If an HDMI monitor is connected to your system, please choose HDMI, if a DVI monitor is attached, please choose DVI. ► NB Azalia This item is used to set whether the HD Audio controller is enabled through the HDMI port on the rear panel. Memory Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. Memory Configuration Memory Configuration Help Item Bank Interleaving [Disabled] Enable Bank Memory Channel Interleaving [Enabled] Interleaving Enable Clock to All DIMMs [Disabled] MemClk Tristate C3/ALTVID [Disabled] Memory Hole Remapping [Enabled] DCT Unganged Mode [Always] Power Down Enable [Enabled] Power Down Mode [Channel] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Bank Interleaving Interleaving allows banks of SDRAM to alternate their refresh and access cycles. One bank will undergo its refresh cycle while another is being accessed. This improves memory performance by masking the refresh cycles of each memory bank. 31