Foxconn A7GM-S English Manual. - Page 45

3 When "SATA IDE Combined Mode" is enabled, you can choose : [SATA as Primary] : Set SATA ports 5, 6 to function as the Primary IDE [SATA as Secondary] : Set SATA ports 5, 6 to function as the Secondary IDE. Primary IDE Master Primary IDE Slave Secondary IDE Master With PATA IDE drives Onchip SATA Channel Enabled Onchip SATA Channel Disabled SATA Combined Mode SATA Combined Mode Enabled Disabled SATA as Secondary IDE0 IDE1 SATA 5 SATA as Primary SATA 5 SATA 6 IDE0 SATA as Secondary IDE0 IDE1 - SATA as Primary IDE0 SATA 5 SATA 6 IDE0 Without PATA IDE drives Onchip SATA Channel Enabled Onchip SATA Channel Disabled SATA Combined Mode Enabled SATA Combined Mode Disabled SATA as SATA as Secondary Primary - SATA 5 - SATA 5 - SATA 6 - SATA 6 SATA 5 - - - RAID/ AHCI IDE0 IDE1 - Secondary IDE Slave SATA 6 IDE1 - IDE1 IDE1 SATA 6 - - - - Third IDE Master SATA 1 SATA 1 SATA 1 SATA 1 - SATA 1 SATA 1 SATA 1 - - Third IDE Slave SATA 3 SATA 3 SATA 3 SATA 3 - SATA 3 SATA 3 SATA 3 - - Fourth IDE Master SATA 2 SATA 2 SATA 2 SATA 2 - SATA 2 SATA 2 SATA 2 - - Fourth IDE Slave SATA 4 SATA 4 SATA 4 SATA 4 - SATA 4 SATA 4 SATA 4 - - USB Configuration CMOS Setup Utility - Copyright (C) 1985-2006, American Megatrends, Inc. USB Configuration USB Configuration Help Item Module Version - 2.24.2-13.4 Enables support for legacy USB. AUTO USB Devices Enabled : option disables 1 Drive legacy support if no USB devices are Legacy USB Support [Enabled] connected. USB 2.0 Controller Mode [High Speed] BIOS EHCI Hand-Off [Enabled] ► USB Storage Configuration [Press Enter] Move Enter:Select +/-/:Value F10:Save ESC:Exit F1:General Help F9:Optimized Defaults ► Legacy USB Support This item is used to enable the support for USB devices on legacy OS. If you have a USB keyboard or mouse, set to auto or enabled. ► USB 2.0 Controller Mode 38