Foxconn A7GM-S English Manual. - Page 94

Create RAID Ready A "RAID Ready" system is a specific system configuration that, with the addition of a second Serial ATA hard drive, can be seamlessly migrated to a configuration that provides either improved storage performance or data protection from a single hard drive failure. 1. Select [2] from the main menu, "Define LD Menu" appears. FastBuild (tm) Utility (c) 2007 Advanced Micro Devices, Inc. [ Define LD Menu ] LD No RAID Mode Total Drv Capacity(GB) LD 1 LD 2 LD 3 LD 4 LD 5 LD 6 LD 7 LD 8 LD 9 LD10 R−−A−ID− 0 −−−2 −−1−6−3−.−9−9 Status −F−u−n−ctional 5 [ Keys Available ] [↑] Up [↓] Down [ESC] Exit [Enter] Select 2. Press [Enter], the screen appears as below. 3. Use [↓] key to select the hard disk, press [Space] key to change its assignment status to "Y". 4. Press [Ctrl-Y] to save the setting. FastBuild (tm) Utility (c) 2007 Advanced Micro Devices, Inc. [ Define LD Menu ] LD No RAID Mode Total Drv LD 1 RAID READY 1 Stripe Block: NA Gigabyte Boundary: ON Fast Init: ON Cache Mode: WriteThru [ Drives Assignment ] Channel :ID Drive Model Compatibilities Capacity(GB) Assignment 1 :Mas HDS728090PLA380 SATA 3G 82.34 N 2 :Mas WDC WD1200JD-98HBB0 SATA 1.5G 120.03 N 3 :Mas Hitachi HDT725025VLA3 SATA 3G 250.05 N 4 :Mas ST3320620AS SATA 1.5G 320.07 Y [ Keys Available ] [↑] Up [↓] Down [ESC] Exit [Space] Change [Crtl-Y] SAVE [PgUp/Dn] Page Change 87