Fujitsu ST5030D User's Guide - Page 19

Getting Started In the following table, a "blinking" LED flashes at the rate of once per second; an LED that is "blinking, slow" flashes at the rate of one second on, five seconds off. Icon Mode/State LED State Remarks Battery HDD Access Security • On State Green, continuous • Idle Mode Amber, continuous Red, continuous Red, blinking • Suspend-to-RAM, without AC adapter • Suspend-to-RAM with AC adapter Green, blinking slow Amber, blinking slow Red, blinking slow • Hibernate Off (Save-to-Disk), with AC adapter • Off State • Hibernate (Save-to-Disk), without AC adapter • On State (or flashing) • Idle Mode • Suspend-to-RAM • Hibernate (Save-to-Disk) • Off State • On State Green Off Green, continuous (until password is entered) Battery charge is between 50%-100% Battery charge is between 13%-49% Battery charge is between 0%-12% There is a battery error. Battery charge is between 50%-100%. Battery charge is between 13%-49%. Battery charge is between 0%-12%. Battery is not installed, or system is off or in Hibernate mode. If battery is inserted during power off, LED blinks amber for 4 seconds to detect battery. Battery status is displayed for 5 seconds after that. Displayed when hard disk drive is accessed. Hard disk drive is not being accessed. The Security Indicator lights (if a password was set) when the system resumes from Off or Standby modes. You must enter the password that was set in the Security Panel before your system will resume operation. (See Security Functions of Application Buttons on page 14 for more information.) Table 1-2. System Status Indicators 9