Gateway E-9220T Gateway E-9220T Server User Guide - Page 49
To con the SATA RAID solution, Step 2
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 49 highlights
Chapter 4: Installing Components To configure the SATA RAID solution: 1 Open the BIOS Setup utility as described in the previous procedure. 2 Select Create RAID Volume from the Management menu. 3 Enter the name of the volume, or press ENTER to accept the default. 4 Use the up and down arrow keys to select a RAID level. 5 Set the RAID stripe size (unless your RAID level uses mirroring). 6 Set the capacity of the volume, then press ENTER to create the volume. 7 When you have defined the current volume, confirm your settings when prompted. 8 Repeat Step 2 through Step 7 to configure additional volumes. 9 Exit the RAID Configuration utility and reboot the server. 44 www.gateway.com
44
www.gateway.com
Chapter 4: Installing Components
To configure the SATA RAID solution:
1
Open the BIOS Setup utility as described in the previous procedure.
2
Select
Create RAID Volume
from the Management menu.
3
Enter the name of the volume, or press
E
NTER
to accept the default.
4
Use the up and down arrow keys to select a RAID level.
5
Set the RAID stripe size (unless your RAID level uses mirroring).
6
Set the capacity of the volume, then press
E
NTER
to create the volume.
7
When you have defined the current volume, confirm your settings when prompted.
8
Repeat
Step 2
through
Step 7
to configure additional volumes.
9
Exit the RAID Configuration utility and reboot the server.