Gateway E-9220T Gateway E-9220T Server User Guide - Page 68
Reinstall the processor and heatsink by following the instructions
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 68 highlights
Replacing the system board 9 Pull the system board away from the case and carefully remove it, then place it in a static-free bag on a stable work surface. 10 Insert the new system board into the case, aligning the holes in the board with the threaded standoffs on the side of the case. 11 Secure the system board to the case with the seven (7) screws you removed previously. 12 Reinstall the memory by following the instructions in "Installing memory" on page 45. 13 Reinstall the processor and heatsink by following the instructions in "Replacing the processor" on page 51. 14 Connect the power and data cables. 15 Reinstall the expansion cards by following the instructions in "Installing PCI expansion cards" on page 47. 16 Follow the instructions in "Closing the server case" on page 37. www.gateway.com 63