Gateway E-9220T Gateway E-9220T Server User Guide - Page 58
system board
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Replacing the processor 11 Place the heat sink on the processor, making sure the Thermal Interface Material (TIM) is aligned between the heat sink and the processor. 12 Line up the four captive screws with the four posts surrounding the processor, then gradually and evenly tighten the four captive screws to secure the heat sink to the system board. 13 Follow the instructions in "Installing the processor air duct" on page 34. 14 Follow the instructions in "Closing the server case" on page 37. www.gateway.com 53
53
www.gateway.com
Replacing the processor
11
Place the heat sink on the processor, making sure the Thermal Interface Material (TIM)
is aligned between the heat sink and the processor.
12
Line up the four captive screws with the four posts surrounding the processor, then
gradually and evenly tighten the four captive screws to secure the heat sink to the
system board.
13
Follow the instructions in
“Installing the processor air duct” on page 34
.
14
Follow the instructions in
“Closing the server case” on page 37
.