Gateway E-9220T Gateway E-9220T Server User Guide - Page 75
Using the BIOS Setup Utility, Turn off the server
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
Chapter 5: Using the BIOS Setup Utility 3 Remove the jumper across pins 1-2 of header J3F3, then place the jumper across pins 2-3. Jumper J3F3 4 Follow the instructions in "Closing the server case" on page 37. 5 Reconnect the power cords and turn on the server. The BIOS password(s) is cleared. 6 Turn off the server, then disconnect the power cords and all other cables connected to the server. 7 Follow the instructions in "Opening the server case" on page 30. 8 Place the jumper back onto pins 1-2. 9 Follow the instructions in "Closing the server case" on page 37. 70 www.gateway.com
70
www.gateway.com
Chapter 5: Using the BIOS Setup Utility
3
Remove the jumper across pins 1-2 of header J3F3, then place the jumper across
pins 2-3.
4
Follow the instructions in
“Closing the server case” on page 37
.
5
Reconnect the power cords and turn on the server. The BIOS password(s) is cleared.
6
Turn off the server, then disconnect the power cords and all other cables connected
to the server.
7
Follow the instructions in
“Opening the server case” on page 30
.
8
Place the jumper back onto pins 1-2.
9
Follow the instructions in
“Closing the server case” on page 37
.
Jumper
J3F3