Gateway E-9220T Gateway E-9220T Server User Guide - Page 51
To install or replace memory, System Memory
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 51 highlights
Chapter 4: Installing Components To install or replace memory: 1 Follow the instructions in "Preventing static electricity discharge" on page 29. 2 Follow the instructions in "Opening the server case" on page 30. 3 Pull the plastic tabs away from the sides of the memory module slot. If you are replacing a memory module, remove the old module. 4 Align the notch on the new module with the notch in the memory module slot and press the module firmly into the slot. The tabs on the sides of the memory slot should secure the memory module automatically. 5 Follow the instructions in "Closing the server case" on page 37. 6 Restart your server and open the BIOS Setup utility. Verify the System Memory listed in the Main menu. When you exit the BIOS Setup utility, make sure that the operating system loads completely. 46 www.gateway.com