Gateway E-9220T Gateway E-9220T Server User Guide - Page 66
Replacing the system board
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Replacing the system board Replacing the system board To replace the system board: 1 Follow the instructions in "Preventing static electricity discharge" on page 29. 2 Follow the instructions in "Opening the server case" on page 30. 3 Remove the processor air duct by following the instructions in "Removing the processor air duct" on page 33. 4 Remove the memory modules by following the instructions in "Installing memory" on page 45. 5 Remove all of the expansion cards by following the instructions in "Installing PCI expansion cards" on page 47. 6 Remove the heat sink and processor by following the instructions in "Replacing the processor" on page 51. 7 Disconnect the power and data cables from the system board, noting their locations and orientation. (You will reconnect the cables after you install the new board.) www.gateway.com 61