Gateway E-9220T Gateway E-9220T Server User Guide - Page 61
Replacing a fan
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Chapter 4: Installing Components Replacing a fan Important Make sure that you replace a fan with an identical replacement fan. To replace a front fan: 1 Follow the instructions in "Preventing static electricity discharge" on page 29. 2 Follow the instructions in "Opening the server case" on page 30. 3 Remove the processor air duct by following the instructions in "Removing the processor air duct" on page 33. 4 Unplug the fan cable from the fan connector on the system board. Fan retention tab Fan release tab Fan handle Fan retention tab Fan cable 5 Grasp the fan handle and press the fan release tab, then disengage the fan and move it away from the chassis. 6 Pull the fan from the chassis. 56 www.gateway.com
56
www.gateway.com
Chapter 4: Installing Components
Replacing a fan
To replace a front fan:
1
Follow the instructions in
“Preventing static electricity discharge” on page 29
.
2
Follow the instructions in
“Opening the server case” on page 30
.
3
Remove the processor air duct by following the instructions in
“Removing the
processor air duct” on page 33
.
4
Unplug the fan cable from the fan connector on the system board.
5
Grasp the fan handle and press the fan release tab, then disengage the fan and move
it away from the chassis.
6
Pull the fan from the chassis.
Important
Make sure that you replace a fan with an identical replacement fan.
Fan handle
Fan cable
Fan retention
tab
Fan retention
tab
Fan release
tab