Gateway E-9220T Gateway E-9220T Server User Guide - Page 74
Resetting BIOS passwords, To clear the BIOS passwords
View all Gateway E-9220T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 74 highlights
Resetting the BIOS 9 Follow the instructions in "Closing the server case" on page 37. 10 Reconnect the power cords and turn on the server. The BIOS memory is cleared. 11 Turn off the server, then disconnect the power cords and all other cables connected to the server. 12 Follow the instructions in "Opening the server case" on page 30 13 Place the jumper back onto pins 1-2. 14 Follow the instructions in "Closing the server case" on page 37. 15 Turn on the server. A message appears saying that the CMOS Date and Time are not set. 16 Press F1 to reset the BIOS to factory default settings. Resetting BIOS passwords To reset BIOS password(s), you must either reset and clear all BIOS settings, or use the Password Clear jumper. To reset BIOS passwords, follow the instructions in "Resetting the BIOS" on page 68. To clear the BIOS password(s): 1 Turn off the server, then disconnect the power cords and all other cables connected to the server. 2 Follow the instructions in "Opening the server case" on page 30. Caution Moving the jumper while the power is on can damage your server. Always turn off the server and unplug the power cords and all other cables before changing the jumper. www.gateway.com 69