Haier AB122MCERA Operation Manual - Page 20

insecticide

Page 20 highlights

Maintenance Cleaning the air outlet port and the shell) A Attention • Don't use gasoline, benzene, diluents, polishing powder or liquid insecticide to clean them. • Do not clean them with hot water of above 50°C to avoid fading or distorting. • Wipe them with soft dry cloth. • Water or neutral dry cleanser is recommended if the dust cannot be removed. • The Wind Deflector can be dismantled to clean (as below). [ (Cleaning Wind Deflector: • Do not wipe the wind deflector with water forcibly to avoid the floss falling off. Maintenance before and after Operating Season c Before Operating Season: 1. Please make the following checkup: • There is no blockage in inlet port and outlet port of outdoor and indoor units. • The ground line and the wiring are in the proper state. If abnormal condition occurs, consult the after-service personnel. 2. Clean the air cleaner and the shell. • After cleaning, the air cleaner must be mounted. 3. Switch it on to the power. • After cleaning, the air cleaner must be mounted. After Operating Season: 1. In sunny days, blowing operation can be performed for half a day to make the inside of machine dry. 2. Switch it off. • Electrical power should be cut down to economize electricity, or the machine will still consume power. 3. Clean the air cleaner and the shell. •Air cleaner and shell must be mounted after cleaning. For cleaning details, refer to Maintenance. 18

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

Maintenance
Cleaning
the
air
outlet
port
and
the
shell)
A
Attention
Don't
use
gasoline,
benzene,
diluents,
polishing
powder
or
liquid
insecticide
to
clean
them.
Do
not
clean
them
with
hot
water
of
above
50°C
to
avoid
fading
or
distorting.
Wipe
them
with
soft
dry
cloth.
Water
or
neutral
dry
cleanser
is
recommended
if
the
dust
cannot
be
removed.
The
Wind
Deflector
can
be
dismantled
to
clean
(as
below).
(Cleaning
Wind
Deflector:
[
Do
not
wipe
the
wind
deflector
with
water
forcibly
to
avoid
the
fl
oss
falling
off.
Maintenance
before
and
after
Operating
Season
c
Before
Operating
Season:
1.
Please
make
the
following
checkup:
There
is
no
blockage
in
inlet
port
and
outlet
port
of
outdoor
and
indoor
units.
The
ground
line
and
the
wiring
are
in
the
proper
state.
If
abnormal
condition
occurs,
consult
the
after
-service
personnel.
2.
Clean
the
air
cleaner
and
the
shell.
After
cleaning,
the
air
cleaner
must
be
mounted.
3.
Switch
it
on
to
the
power.
After
cleaning,
the
air
cleaner
must
be
mounted.
After
Operating
Season:
1.
In
sunny
days,
blowing
operation
can
be
performed
for
half
a
day
to
make
the
inside
of
machine
dry.
2.
Switch
it
off.
Electrical
power
should
be
cut
down
to
economize
electricity,
or
the
machine
will
still
consume
power.
3.
Clean
the
air
cleaner
and
the
shell.
•Air
cleaner
and
shell
must
be
mounted
after
cleaning.
For
cleaning
details,
refer
to
Maintenance.
18