HP 1200 HP PCL/PJL reference - PCL 5 Comparison Guide - Page 120

The typeface/font information, described in the "HP LaserJet 4PJ Printer" section earlier in this chapter for the Japanese typefaces, also applies to the LaserJet 4LC printer's Chinese typefaces with the following differences. The default values for the Text Parsing Method command are different for the HP LaserJet 4LC. These default values are 0 or 38 (provided the default symbol set is GB2312, otherwise it is 0). Also, the examples in this section can be used for the Chinese fonts, provided the symbol set value field in the Symbol Set command is changed to 18C (for the GB2312 symbol set) and the typeface value in the font selection command string is changed to one of the Chinese fonts [for example, the Japanese font selection command ?(19K?(s1p10v1s4b2852T should be changed to ?(18C?(s1p10v1s4b37058T ]. HP LaserJet 5P and 5MP Printers The HP LaserJet 5P and 5MP printers were released March 6, 1995. These printers are similar to the HP LaserJet 4P printer except that they are designed to run faster, have an MP paper tray in place of the manual feed slot, and have a reduced control panel similar to the HP LaserJet 4L printer. The HP LaserJet 5P / 5MP printer's maximum print speed is 6 pages per minute (HP LaserJet 4P runs at 4 ppm) and has a print resolution of 600 dpi. Another new feature on this printer is an IrDA-compliant infrared serial I/O port located on the front of the printer. PCL operation is almost identical to that of the HP LaserJet 4 Plus printer. (Refer to Table 1-1, HP LaserJet Printer Feature Comparison, for the specific PCL implementation.) 2-72 Printer-Specific Differences ENWW