HP 12000 HP 12200 Gateway Virtual Library System User Guide (BW403-10001, June - Page 101
Destroying a Virtual Library, Next Step, Return, System, Finish
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Figure 23 Create Virtual Library Wizard window (10 of 12) 9. Click Next Step. A summary window opens and displays details about the cartridges you created. 10. Click Next. 11. Click Return. The System tab window opens. You can now select the new library, tape drives, and cartridges in the navigation tree to view their configuration information, such as their default LUN numbers. Destroying a Virtual Library NOTE: Destroying a virtual library may create a gap in the default LUN numbering on the Fibre Channel host port to which it was mapped. If a gap is created, restart the VLS device emulations to remove the gap. See "Restarting VLS Device Emulations" (page 109). Most operating systems will ignore (cannot access) any virtual devices with LUN numbers that follow a gap in the LUN numbering on an Fibre Channel host port. NOTE: You cannot destroy a library that is currently being accessed by a backup application. When a virtual library is destroyed, all the tape drives associated with the library are also destroyed. The cartridges in the virtual library, however, are not destroyed. They are moved to the Firesafe where they are stored until you either destroy them or associate them with a virtual library. See "Managing Cartridges" (page 105). To destroy (delete) a virtual library, from Command View VLS: 1. Click the System tab. 2. Select the virtual library in the navigation tree. The virtual library details window opens. 3. Click Destroy Virtual Library in the task bar. 4. Click Yes to confirm. 5. Click Finish. Destroying a Virtual Library 101