HP 12000 HP 12200 Gateway Virtual Library System User Guide (BW403-10001, June - Page 96
Create Virtual Library Wizard window 2 of 12, CAUTION, Next Step, Maximum, Slots
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 96 highlights
4. Select the Fibre Channel host port and node on which to present the virtual library. Only one port or port pair may be selected. 5. Select the type of tape library to emulate. NOTE: The only library emulation Veritas supports for use with Netbackup is the HP VLS emulation. IBM supports using the HP VLS emulation for TSM version 5.5.1 or higher. The HP VLS emulation is not intended for use with other backup applications. 6. Click Next Step. The window displays the default library name and the default number of Maximum Slots, Maximum Ports, and Maximum Drives based on the physical tape library emulation selected (Figure 18 (page 96)). Figure 18 Create Virtual Library Wizard window (2 of 12) 7. Change the library name if you prefer. You can use letters, numbers, and underscores (no blank spaces). 8. Enter the maximum number of cartridge slots that may be added to the library in the Maximum Slots box. The default values in the Maximum Slots box is based on the physical tape library you selected. CAUTION: Changing the defaults can have unpredictable results if your backup application expects a certain number of slots in a specific library type. 9. Enter the maximum number of input/export ports on which the library may be configured to be visible in the Maximum Ports box. 10. Enter the maximum number of tape drives the library may contain in the Maximum Drives box. NOTE: The maximum values entered cannot be changed later. So, consider your potential future requirements when entering values. Not all of the tape drives and cartridges must be created at this time. You may add tape drives later. 11. Click Next Step. A window opens indicating that by default all libraries connected to the VLS have access to all hosts. 96 Configuration