HP 12000 HP 12200 Gateway Virtual Library System User Guide (BW403-10001, June - Page 21

Mounting Ethernet Switch 6600-24G into the Rack, From the back of the rack, on each side of the switch

Get HP 12000 PDF manuals and user guides View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 21 highlights

Mounting Ethernet Switch 6600-24G into the Rack 1. From the back of the rack, align the grooved ends of the switch rails with the posts on the mounting flanges. Placing the grooved ends between the mounting flange and the loose washer and nut provides guidance. 2. Slide the switch fully into the rack. 3. Tighten the washer and nut on both sides of the rack to secure the switch rails to the mounting flanges. 4. From the back of the rack, on each side of the switch, insert an M5 screw through the holes in the rail and into the holes in the rack. 5. Tighten the M5 screws to secure the switch to the rack. 6. Attach a power cable to the switch's power supply. 7. Plug the power cable into an AC power source. 8. Route the power cable through the left side of the rack and plug it into a PDM. 9. Attach a 1U cover plate to the front of the rack. Installing the Ethernet Switches into a Rack 21

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
Mounting Ethernet Switch 6600-24G into the Rack
1.
From the back of the rack, align the grooved ends of the switch rails with the posts on the
mounting flanges. Placing the grooved ends between the mounting flange and the loose washer
and nut provides guidance.
2.
Slide the switch fully into the rack.
3.
Tighten the washer and nut on both sides of the rack to secure the switch rails to the mounting
flanges.
4.
From the back of the rack, on each side of the switch, insert an M5 screw through the holes
in the rail and into the holes in the rack.
5.
Tighten the M5 screws to secure the switch to the rack.
6.
Attach a power cable to the switch's power supply.
7.
Plug the power cable into an AC power source.
8.
Route the power cable through the left side of the rack and plug it into a PDM.
9.
Attach a 1U cover plate to the front of the rack.
Installing the Ethernet Switches into a Rack
21