HP 12000 HP 12200 Gateway Virtual Library System User Guide (BW403-10001, June - Page 152
HP Systems Insight Display LEDs and Internal Health LED Combinations - drivers
View all HP 12000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 152 highlights
NOTE: The HP Systems Insight Display LEDs represent the system board layout. HP Systems Insight Display LEDs and Internal Health LED Combinations When the internal health LED on the front panel illuminates either amber or red, the server is experiencing a health event. Combinations of illuminated system LEDs and the internal health LED indicate system status. HP Systems Insight Display LED and color Internal health LED System power color LED Processor (amber) Red Amber Amber DIMM (amber) Red Amber Overtemperature Amber (amber) Red Interlock (amber) Red Fan (amber) Amber Red Power supply Red (amber) Amber Green Green Green Green Green Green Green Green Amber Green Power cap (off) - Power cap - (green) Power cap - (flashing amber) Power cap - (green) Amber Flashing green Amber Green Status One or more of the following conditions may exist: • Processor in socket X has failed. • Processor X is required yet not installed in the socket. • Processor X is unsupported. • ROM detects a failed processor during POST. Processor in socket X is in a pre-failure condition. One or more DIMMs have failed. DIMM in slot X is in a pre-failure condition. The Health Driver has detected a cautionary temperature level. The server has detected a hardware critical temperature level. The PCI riser board assembly is not seated properly. One fan is failed or removed. Two or more fans have failed or are removed. • Only one power supply is installed and that power supply is in standby. • Power supply fault • System board fault • Redundant power supply is installed and only one power supply is functional. • AC power cord is not plugged into redundant power supply. • Redundant power supply fault • Power supply mismatch at POST or power supply mismatch through hotplug addition. Standby Waiting for power Power cap has been exceeded. Power is available. 152 Component Identification