HP 4400 HP StorageWorks Fabric OS 6.4.0c Release Notes (5697-0703, September 2 - Page 46
WebTools GUI shows Expiry Date as NA for Universal Time Slot Based - driver
View all HP 4400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Closed defect summary Solution Customer unable to remove Admin domains, SFC rejected errors sent by AD3. Cfgdisable command gets following message: "Too many devices found (>120) in default zone." Fixed in Fabric OS 6.4.0 Workaround prior to upgrade: 1. Migrated all devices to AD0 before as outlined in the AD migrate instructions. 2. Remove the devices from the ADs using the: ad -select 255 ad -remove -d "" ad --apply 3. Perform 'ad --clear -f' followed by 'ad --apply' from the AD255 context and this should remove the ADs properly. HP StorageWorks 4/256 director with multiprotocol router blade cannot see new device across LSAN after upgrade from Fabric OS v5.x nondisruptively all the way to Fabric OS 6.2.x. Bounce of host port causes paths to be lost between host and target. Fixed in Fabric OS 6.4.0 Hafailover on a DC SAN Backbone platform with 10/24 FCoE blade causes Error C2-5830 message followed by kernel panic on blade driver: ASSERT - Failed expression: port0 && oid_is_valid(port0). Fixed in Fabric OS 6.4.0 Workaround prior to upgrade: Avoid HA Failover on a chassis with 10/24 FCoE blades installed. 400 multiprotocol router panicked while upgrading the peer 400 multiprotocol router from 6.1.0c to 6.2.0g while fabric is not stable and going through a fabric rebuild. Fixed in Fabric OS 6.4.0 Switch admin: User tab: The "Lf ID- Role mapping: Name" window heading and tool tip are inappropriate Fixed in Fabric OS 6.4.0 NS GE_PT request from1320 devices per switch may get rejected. Fixed in Fabric OS 6.4.0 WebTools GUI shows Expiry Date as NA for Universal Time Slot Based Fixed in Fabric OS 6.4.0 licenses for HP StorageWorks 1606 extension SAN switch and DC SAN director with multiprotocol extension blade. sysshutdown on 8Gb SAN Switch for HP BladeSystem c-Class may cause panic and reboots. Fixed in Fabric OS 6.4.0 Workaround prior to upgrade: May use "shutdown" CLI. Continuously running chassisdisable/enable test for a few hours causes Fixed in Fabric OS 6.4.0 termination of nameserver daemon. Detected termination of lfmd on standby CP while doing HCL on Edge Fixed in Fabric OS 6.4.0 DC04 SAN director. Multiprotocol router blade heartbeat dead causes reboot while traffic is running over FCIP links. May cause CP failover to take place. Only traffic on the router blade is disrupted. Fixed in Fabric OS 6.4.0 User may not be able to install port mirroring on 1606 extension SAN Fixed in Fabric OS 6.4.0 switch with GE/VE links enabled. 46