HP 6125G HP 6125G & 6125G/XG Blade Switches IP Multicast Configuration - Page 183

192.168.3.2 Up 00:15:32 200 8 0 192.168.1.1 Up 00:06:39 100 13 0 # Display brief information about MSDP peering relationship on Switch E. [SwitchE] display msdp brief MSDP Peer Brief Information Configured Up Listen Connect Shutdown 1 1 0 0 0 Down 0 Peer's Address State Up/Down time AS SA Count Reset Count 192.168.3.1 Up 01:07:08 200 8 0 # Display detailed MSDP peer information on Switch B. [SwitchB] display msdp peer-status MSDP Peer Information MSDP Peer 192.168.1.2, AS 200 Description: Information about connection status: State: Up Up/down time: 00:15:47 Resets: 0 Connection interface: Vlan-interface101 (192.168.1.1) Number of sent/received messages: 16/16 Number of discarded output messages: 0 Elapsed time since last connection or counters clear: 00:17:51 Information about (Source, Group)-based SA filtering policy: Import policy: none Export policy: none Information about SA-Requests: Policy to accept SA-Request messages: none Sending SA-Requests status: disable Minimum TTL to forward SA with encapsulated data: 0 SAs learned from this peer: 0, SA-cache maximum for the peer: none Input queue size: 0, Output queue size: 0 Counters for MSDP message: Count of RPF check failure: 0 Incoming/outgoing SA messages: 0/0 Incoming/outgoing SA requests: 0/0 Incoming/outgoing SA responses: 0/0 Incoming/outgoing data packets: 0/0 Inter-AS multicast configuration by leveraging static RPF peers Network requirements As shown in Figure 55, AS 100 and AS 200 run OSPF within each AS, and run BGP between each other. PIM-SM 1 belongs to AS 100, and PIM-SM 2 and PIM-SM 3 belong to AS 200. Each PIM-SM domain has at least one multicast source or receiver. Loopback 0 is configured as a C-BSR and a C-RP of the related PIM-SM domain on Switch A, Switch D, and Switch G, respectively. 172