HP 640 User Guide - Page 46

Reprinting faxes Report name Sending Confirm Schedule Inform System Data Caller ID Junk Fax Print Fax Content This report shows the fax number, the number of pages, elapsed time of the operation, the communication mode, and the communication results. To set up your machine to automatically print, see Sending Confirm under the "BASIC FAX menu" on page 11. This report shows the document currently stored for Delayed FAX and Send Polling along with the fax number, starting time and type of scheduled event. This report shows the current settings of your HP Fax. After you have changed any setting, print this report to check your changes. If Caller ID is turned on, this report shows the most recent 30 callers who have called your machine. The report will be empty if you don't have Caller ID turned on. This report shows the telephone numbers that are marked as a junk fax to be blocked. Your machine stores fax data into memory as far as the memory is available and lets you print it at later time. For more information, see Reprinting faxes on page 40. Reprinting faxes You may sometimes need to reprint a received fax. Your machine stores the most recently received faxes in memory (approximately 50 pages). As this memory is filled, old faxes that have been printed will be erased to make room for new faxes. NOTE: Unplugging the fax machine power cord and plugging it back in again clears the memory including all unprinted or unsent faxes. A power outage also clears the fax machine memory. 1. Press Menu repeatedly until REPORTS appears and press OK. 2. Press  to choose Print Fax and press OK. • If there are only old faxes, the machine will automatically print all of them and return to Ready mode without moving to the next step. • If there are no faxes in memory, the machine will inform you by displaying Memory Empty. • If there are both old faxes and unprinted faxes in memory, the machine will go to step 3. 40 Feature reference