HP 640 User Guide - Page 54

Clean the cartridge carrier contacts, Access Cartridge, Start/Enter, CAUTION

Page 54 highlights

Maintain the print cartridge 4. Reinstall the cartridge and close the cover and panel. If you spend a long time cleaning the cartridge, the cartridge carrier may have moved back to the original position. If so, press Access Cartridge again to move the carrier to the install position. 5. Press Start/Enter. 6. Press 1 for new cartridge or 2 for the old one. Clean the cartridge carrier contacts Before cleaning these parts, there should be no scheduled job such as delayed fax, send polling, or faxes received into memory. CAUTION: Once you have unplugged the power cord from the machine, all data in memory will be lost. 1. Press Access Cartridge. 2. Open the control panel and cartridge compartment cover and remove the cartridge. See Replace the print cartridge on page 44. 3. Remove the print cartridge. 4. Unplug the power cord from the electrical outlet of the rear of the machine. WARNING! Shock Hazard. Be sure to unplug the power cord before proceeding. 5. Clean the cartridge carrier contacts with clean and cotton swab. 6. Plug in the power cord and reinstall the cartridge. 48 Care and maintenance

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76

48
Care and maintenance
Maintain the print cartridge
4.
Reinstall the cartridge and close the cover and panel.
If you spend a long time cleaning the cartridge, the cartridge carrier may have moved
back to the original position. If so, press
Access Cartridge
again to move the carrier to
the install position.
5.
Press
Start/Enter
.
6.
Press
1
for new cartridge or
2
for the old one.
Clean the cartridge carrier contacts
Before cleaning these parts, there should be no scheduled job such as delayed fax, send
polling, or faxes received into memory.
CAUTION:
Once you have unplugged the power cord from the machine, all data in
memory will be lost.
1.
Press
Access Cartridge
.
2.
Open the control panel and cartridge compartment cover and remove the cartridge.
See
Replace the print cartridge
on page 44.
3.
Remove the print cartridge.
4.
Unplug the power cord from the electrical outlet of the rear of the machine.
WARNING!
Shock Hazard.
Be sure to unplug the power cord before proceeding.
5.
Clean the cartridge carrier contacts with clean and cotton swab.
6.
Plug in the power cord and reinstall the cartridge.